C3 HD GPS Mount Plate

Description

A high-quality billet machined panel for mounting the Voyager Pro to the C3 one-piece top clamps. Note that the four-bolt pattern is compatible with other GPS devices using the industry standard 4-hole AMPS bolt pattern.

• New HD 4-bolt version!
• The lowest-profile mounting surface possible – GPS is less exposed to branches and debris
• Fixed 24° angle relative to the ground for ideal readability (or alternative “Lo” configuration, totally vertical)
• Verified 100% perfect “plug-and-play” fitment with Trail Tech Voyager Pro. Most other GPS models will work too, but cannot be guaranteed
• AMPS pattern holes are tapped for M4 screws included with Voyager pro and many other popular GPS units
• This bolt pattern is an industry standard and used on many Garmin / TomTom / Magellan, etc GPS units, as well as popular and flexible RAM ball mount systems
• Compatible with Trail Tech’s billet Protector case and heavy-duty Aluminum Dock

Includes everything you need to be plug-and-play with Voyager Pro and many other popular GPS units – the billet CNC’ed mount panel and 2 low profile socket cap screws. Does NOT include a GPS dock, or the 4 AMPS screws, as those are typically included with the GPS kit itself. Does NOT include the C3 one-piece top clamp itself (which is mandatory for use) – that’s available on its own here or as part of a handguards kit.

Assembly notes: DON’T over-torque the fasteners! As with any M5 screw, around 5 N-m (3.5 ft-lb) is sufficient, and 3 N-m (2 ft-lb) for the M4.

FAQ – does the new Voyager Pro Aluminum Dock tightening knob interfere with the lightbar? A: Just replace the knob thumb screw with any other M5 fastener. GageBroz exclusive: we provide a 5mm spacer to give you the clearance for the knob.