C3 Billet Thermostat, KTM, Husky, GasGas

C3 Billet Thermostat, KTM, Husky, GasGas

SKU: CATH1348BLK

$179.30

2019-22 KTM 450 SX-F/XC-F, Husky 450 FC/FX
2020-23 KTM 450/500 EXC-F/XCF-W, Husky 450/501 FE
2021-2023 GasGas 450 MC/EX, 500 ES/EW

12 in stock

California residents: WARNING

Description

A thermostat is arguably the single most important upgrade needed for any snowbike setup.

Freezing ambient temperatures plus snow exposure keep the engine from properly warming up, which can cause your EFI to stay in warm-up mode, over fueling the engine, making it run like crap, stalling, burning way too much gas and accelerating engine wear or even risking damage.

A thermostat will help the bike heat up to and maintain the hot 90C/195F temperatures it was designed for. And the C3 thermostat is the one for you!

  • Premium materials and innovative design you’d expect from C3
  • Pipe thread ports in all models designed specifically to accept accessories like heated handlebars and a temperature gauge.
  • Reliable and consistent operation.
  • Bleed hole plus bypass line (included) ensures slow circulation until thermostat opens – then the cooling system is unobstructed and can make full use of radiators if needed, like on warm spring days.
  • Unmatched customization, versatility, and fit and finish.
  • Industry exclusive “del-ring” redundant backup seals.

Full “factory-custom” model is available for many popular bikes:

  • Docks right to your engine and is barely bigger than the fitting it replaces
  • Close to cylinder, accurate temperature reading
  • Easiest and most polished installation possible – no cutting or messing around with hoses

 

Fitment & Instructions:

Please refer to the C3 Powersports Thermostat Kit page for fitment, instructions and more. Click HERE to open this page in a new tab, then scroll down and click the “Master Fitment Chart” tab. Find your make, model and year to make sure you get the right Thermostat Kit. Click on the “Instructions” tab for detailed installation instructions. Click HERE to open C3’s Help page in a new tab.

Please note that the image shown on this page is a housing that’s used on the 2014-22 YZ450F and may not look like the thermostat for your particular bike. All kits include thermostat plus the hoses, tubing, fittings, etc. required to install on your bike.